Apex Technology

Additional Information:

• Delivery Time: 7 DAYS

BOTTLED WATER MANUFACTURING PLANT Water Purification Plant is designed to produce 4000 LPH. i.e. 4M3/day offered 1 Nos. << PROCESS >>

ZEOSORB  Media Filter: (GERMANY) To remove suspended matter from the water.

Katalox Light Filter: (GERMANY) To remove the iron/ Arsenic /Fluoride / Heavy metals etc, This filter media is imported from Germany. It can remove iron upto 15ppm.

Activated Carbon Filter: 1100IV: To remove color, odor & smell from the water.

To remove oil & grease from the raw water. To control BOD & COD in the raw water.

Micron Filtration: To remove micron particles from the raw water.

Osmotic pressure system (High Pressure Pump) To create osmotic pressure in the raw water.

Desalination System by Reverse Osmosis Membrane Element. To desalt the raw water i.e. to reduce total dissolve solids.

Ion Controlling System : To adjust the minerals contains in process water by means of mixing of raw water in the desalted treated water. Due to proportionate mixing required quantity of raw water, we can mix to get required quantity of ions from raw water to desalted water.

Storage of Package Drinking Water. To remove back pressure in R.O. Membrane elements.

Fine polishing filtration.To filter water from 1 to 0.5 micron and achieve crystal clear filtered treated water.

U.V. System:To kill the bacteria from the fine water. elements.

Ozonization: To prevent biological and micro organism growth in the stagnant water.

Final treated water transfer pump : To transfer crystal clear & bacteria free mineral water for Packing / Bottling.

Re-Circulation of Package Drinking water for Ozonization.

To re-circulate and add ozone in mineral water.

Treatment for drinking water production involves the removal of contaminants from raw water to produce water that is pure enough for human consumption without any short term or long term risk of any adverse health effect. Substances that are removed during the process of drinking water treatment include suspended solids, bacteria, algae, viruses, fungi and minerals such as iron and manganese. The processes involved in removing the contaminants include physical processes such as settling and filtration, chemical processes such as disinfection and coagulation and biological processes such as slow sand filtration. Measures taken to ensure water quality not only relate to the treatment of the water, but to its conveyance and distribution after treatment. It is therefore common practice to keep residual disinfectants in the treated water to kill bacteriological contamination during distribution. WHO guidelines are a general set of standards intended to apply where better local standards are not implemeted. More rigorous standards apply across Europe, the USA and in most other developed countries. followed throughout the world for drinking water quality requirements.

Processes
Empty aeration tank for iron precipitation:

• Pre-chlorination for algae control and arresting biological growth
• Aeration along with pre-chlorination for removal of dissolved iron when present with small amounts relatively of manganese
• Coagulation for flocculation or slow-sand filtration
• Coagulant aids, also known as polyelectrolytes – to improve coagulation and for more robust floc formation
• Sedimentation for solids separation that is removal of suspended solids trapped in the floc
• Filtration to remove particles from water either by passage through a sand bed that can be washed and reused or by passage through a purpose designed filter that may be washable.
• Disinfection for killing bacteria viruses and other pathogens.

Technologies for potable water and other uses are well developed, and generalized designs are available from which treatment processes can be selected for pilot testing on the specific source water. In addition, a number of private companies provide patented technological solutions for treatment of specific contaminants. Automation of water and waste-water treatment is common in the developed world. Source water quality through the seasons, scale and environmental impact can dictate capital costs and operating costs. End use of the treated water dictates the necessary quality monitoring technologies, and locally available skills typically dictate the level of automation adopted.

Application:
Residential Establishments like Flats, Apartments, and Homes

• Educational Institutions
• Hotels and Resorts
• Hospitals
• Municipality water supply
• Pharmaceutical needs

Additional Information:

• Delivery Time: 7 DAYS

Apex Technology is a renowned firm which is involved in commitment to quality, we are manufacturing and supplying quality-approved Fluoride Removal Filter. This filter is fitted with set of frontal valve & pipe work. High quality material, which is sourced from certified vendors of market is used in the manufacturing process of the offered range of filters. We use high quality German media as well as Indian media. Water fluoridation is the controlled addition offluoride to a public water supply to reduce tooth decay. Fluoridated water contains fluoride at a level that is effective for preventing cavities; this can occur naturally or by adding fluoride. Bottled watertypically has unknown fluoride levels. Fluoridation does not affect the appearance, taste or smell of drinking water. Water fluoridation is the controlled addition of fluoride to a public water supply to reduce tooth decay. Fluoridated water contains fluoride at a level that is effective for preventing cavities; this can occur naturally or by adding fluoride. Fluoridated water operates on tooth surfaces: in the mouth, it creates low levels of fluoride in saliva, which reduces the rate at which tooth enamel demineralizes and increases the rate at which it remineralizes in the early stages of cavities.  Typically a fluoridated compound is added to drinking water, a process that in the U.S. costs an average of about $1.06 per person-year.  Defluoridation is needed when the naturally occurring fluoride level exceeds recommended limits.  In 2011 the World Health Organization suggested a level of fluoride from 0.5 to 1.5 mg/L (milligrams per litre), depending on climate, local environment, and other sources of fluoride. Bottled water typically has unknown fluoride levels. Dental caries remains a major public health concern in most industrialized countries, affecting 60–90% of schoolchildren and the vast majority of adults. Water fluoridation reduces cavities in children, while efficacy in adults is less clear, A Cochranereview estimates a reduction in cavities when water fluoridation was used by children who had no access to other sources of fluoride to be 35% in baby teeth and 26% in permanent teeth. The evidence quality was poor.  Most European countries have experienced substantial declines in tooth decay without its use, however milk and salt fluoridation is widespread. Recent studies suggest that water fluoridation, particularly in industrialized nations, may be unnecessary because topical fluorides (such as in toothpaste) are widely used, and caries rates have become low. Although fluoridation can cause dental fluorosis, which can alter the appearance of developing teeth or enamel fluorosis the differences are mild and usually not considered to be of aesthetic or public health concern.  There is no clear evidence of other adverse effects from water fluoridation.  Fluoride’s effects depend on the total daily intake of fluoride from all sources. Drinking water is typically the largest source other methods of fluoride therapy include fluoridation of toothpaste, salt, and milk. The views on the most efficient method for community prevention of tooth decay are mixed. The Australian government states that water fluoridation is the most effective way to achieve fluoride exposure that is community-wide.

Demineralization or Deionization is the process of removing mineral salts from water by using the ion exchange process. With most natural water sources it is possible to use Demineralisation and produce water of a higher quality than conventional distillation. Fluid Systems Manufacture a Wide range of custom-built softening, Demineralizing plants for industrial process water applications, with inherent design to conserve water, and save cost. We manufacture and export a wide range of DM Plants that are extensively used in various industries. Widely known for its weather resistance and leak proof ability, our products can be customized as per the specific demands of our clients. We also provide installation training, operation training and onsite support for our DM plants. The demineralization process utilises acid regenerated cation resin & caustic regenerated anion resin to remove minerals from water. Trolly mounted automatic operation DM Plants are also available for small industries and laboratories. DM Plants are available in a wide range with max flow rate from 10 Ltrs/hr to 250000 Ltrs/h in standard plants.

Applications:

• Easy to install, Simple to operate, Complete with regeneration equipment & control .

Purpose:

• For best distilled quality water without heat & electricity. Mainly uses in Pharmaceutical industries. Chemical Industries. Mirror Silvering, Power Stations, Research Labs, Food Processing, College Labs, Plastic Industries.

Construction:

• Two Ion exchange MSRL / FRP shell, one is Cation Exchanger and other is Anion Exchange fitted with MSRL / PVC pipe lines, valves, strainers and filled up with Cation and Anion Exchange Resigns and containing Acid and Alkali proof pots for regeneration.

Operation:

• In the simplest system the raw water flows successful through a Cation Exchanger regenerated with acid an Anion Exchanger regenerated with caustic soda. When the raw water passes through Cation Exchanger all the Cations are retained by the resin and there is no longer anything in the water but the acids of the salts it contained initially. Then the water passes through Anion Exchanger which absorbs the Acids and thus the D.M water is produced.

Quality Of D.M Water:

• Purified water as per I.P conductivity -1 to 20 micro ohms/cm pH of D.M water : Around 7.0 Storage Battery: IS: 1069 / 64.