APEX TECHNOLOGY

Additional Information:

• Item Code: AT-CL
• Production Capacity: 100000
• Delivery Time: 5 to 7 days
• Packaging Details: Plastic Jar 50/100/250Ltr

Carbon filtering is a method of filtering that uses a bed of activated carbon to remove contaminants and impurities, using chemical adsorption. Each particle/granule of carbon provides a large surface area/pore structure, allowing contaminants the maximum possible exposure to the active sites within the filter media. One pound (454 g) of activated carbon contains a surface area of approximately 100 acres (40 Hectares). Activated carbon works via a process called adsorption, whereby pollutant molecules in the fluid to be treated are trapped inside the pore structure of the carbon substrate. Carbon filtering is commonly used for water purification, in air purifiers and industrial gas processing, for example the removal of siloxanes and hydrogen sulphide from biogas. It is also used in a number of other applications, including respirator masks, the purification of sugarcane and in the recovery of precious metals, especially gold. It is also used in cigarette filters. Active charcoal carbon filters are most effective at removing chlorine, sediment, volatile organic compounds (VOCs), taste and odor from water. They are not effective at removing minerals, salts, and dissolved inorganic compounds. Typical particle sizes that can be removed by carbon filters range from 0.5 to 50 micrometres. The particle size will be used as part of the filter description. The efficacy of a carbon filter is also based upon the flow rate regulation. When the water is allowed to flow through the filter at a slower rate, the contaminants are exposed to the filter media for a longer amount of time.

• Mechanical Filtration (fine particles, TSS, Turbidity etc.)
• Catalytic precipitation and sorption (Fe, Mn, Cu, Pb etc.)
• Adsorbtion (flocculant formation and adsorption of As, Heavy Metals, Radionuclides)

• Total Suspended Solids
• Sediments
• Turbidity
• Organics
• Colour (some, organic)
• Odour

Removal of:

• Iron (Inlet conc. up to. 100 mg/L)
• Manganese (Inlet conc. up to 20 mg/L)
• Arsenic
• Hydrogen sulfide
• Uranium, Radium
• Heavy Metals
• Radionuclide

Best features:

• WQA Certified to meet ANSI/NSF 61 standard for Drinking Water applications
• Very high surface area
• High MnO2 coating (10%)
• Contains NO crystalline Silica
• No mandatory dosing required
• Light weight media – saves backwash water

Additional Information:

• Delivery Time: 7 DAYS

water purification is the process of removing undesirable chemicals, biological contaminants, suspended solids and gases from contaminated water. The goal is to producewater fit for a specific purpose. The standards for drinkingwater quality are typically set by governments or by international standards.

This makes it easier to apply as a disinfectant in medical areas, next to its use as a bleach. When bleaching powder dissolves, it reacts with water to underchloric acid (HOCl) and hypochlorite ions (OCl–). Chlorine kills pathogens such as bacteria and viruses by breaking the chemical bonds in their molecules.