APEX TECHNOLOGY

The Iron Removal Filters are designed to remove the Excess Iron content present in the feed water with minimum pressure drop. Most iron filtration systems operate on the principal of oxidizing the iron (oxidation) to convert it from a ferrous (dissolved or soluble) to a ferric or undissolved state.

Iron removal plants can be based on different filtration media, depending on the iron and manganese concentration, the oxygen level, CO2 content and hardness of the water. Plant principle: First, air is injected in order to oxidize the iron. The oxidized iron will then precipitate on a sand filter.

Additional Information:

• Production Capacity: 500 LTR PER HOUR

Alkaline water has a higher pH level than regular drinking water. Because of this, some advocates of alkaline water believe it can neutralize the acid in your body.

Normal drinking water generally has a neutral pH of 7. Alkaline water typically has a pH of 8 or 9. However, pH alone isn’t enough to impart substantial alkalinity to water.

Alkaline water must also contain alkaline minerals and negative oxidation-reduction potential (ORP). ORP is the ability of water to act as a pro- or antioxidant. The more negative the ORP value, the more antioxidizing it is.

Additional Information:

• Item Code: AT-250lph
• Production Capacity: SILIGURI
• Delivery Time: 15-30
• Packaging Details: corrugated boxes

Additional Information:

• Production Capacity: 1000 liter per hour
• Delivery Time: 3 to 7 days

• Multi stage purification RO+UV+TDS controller
• Most economical Ro water purifier
• 100 GPD Pump, 24 V 2A SMPS, Good quality RO Membrane works up to 1500 ppm TDS.
• TDS control valve to adjust the level of minerals in pure water.Crystal clear highly pure output water.
• Good Quality electrical parts.